Review of Dynami 605
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Dynami 605 or similar boat for sale
The boat is typically equipped with an engine.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Dynami 605 is about 542 kg/cm, alternatively 3039 lbs/inch.
Meaning: if you load 542 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 3039 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Dynami 605 is 3.43.
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
|---|---|---|---|---|
| Jib sheet | 16.7 m | (54.7 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 16.7 m | (54.7 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 41.7 m | (136.7 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 36.7 m | (120.3 feet) | 16 mm | (5/8 inch) |
This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Dynami 605 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.