Review of A Le Comte 35

Basic specs.

sail specifications
The A Le Comte 35 is a sailboat.

Here we would have liked to show you nice photos of the A Le Comte 35.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a A Le Comte 35 or similar boat for sale


The boat can enter most marinas as the draft is just about 1.68 - 1.78 meter (5.51 - 5.81 ft) dependent on the load.


The boat is typically equipped with an engine.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.9 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for A Le Comte 35 is 287 which categorizes this boat among 'medium weight cruisers'.

Heavy Light 34% 0 50 100
34% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.

SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for A Le Comte 35 with ISO 8666 reference sail is 17.4, with a 135% genua the SA/D is 20.6.

Low High 58% 0 50 100
The SA/D ratio indicates that it is faster than 58% of all similar sailboat designs in light wind.



Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

Guiding dimensions of running rig
Mainsail halyard 29.9 m(98.0 feet)12 mm(1/2 inch)
Jib/genoa halyard29.9 m(98.0 feet)12 mm(1/2 inch)
Spinnaker halyard29.9 m(98.0 feet)12 mm(1/2 inch)
Jib sheet 10.7 m(35.0 feet)14 mm(0.55 inch)
Genoa sheet10.7 m(35.0 feet)14 mm(0.55 inch)
Mainsheet 26.7 m(87.5 feet)14 mm(0.55 inch)
Spinnaker sheet23.5 m(77.0 feet)14 mm(0.55 inch)
Cunningham4.4 m(14.5 feet)12 mm(1/2 inch)
Kickingstrap8.8 m(29.0 feet)12 mm(1/2 inch)
Clew-outhaul8.8 m(29.0 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.


We are always looking for new photos. If you can contribute with photos for A Le Comte 35 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.