The boat is equipped with 3000.0 liter fresh water capacity.
The boat may be equipped with three inboard MTU diesel engines at 2400 hp (1788 kW). The speed is 53.0 knots.
The fuel tank has a capacity of 19000.0 liters (5019 US gallons, 4179 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
AB 140 holds a CE certification:
The boat is by European Union certified as Class A. OCEAN:The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for AB 140 is about 2229 kg/cm, alternatively 12486 lbs/inch.
Meaning: if you load 2229 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 12486 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for AB 140 is 5.20.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for AB 140 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.