Review of Abati 55 Portland

Basic specs.

The Abati 55 Portland is a large motorboat.

Here we would have liked to show you nice photos of the Abati 55 Portland.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Abati 55 Portland or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior

The boat is equipped with 6+2+1 berths and 1000.0 liter fresh water capacity.

Engine

The boat is typically equipped with dual inboard MAN diesel engines at 1600 hp (1192 kW). The speed is 32.0 knots.

The fuel tank has a capacity of 3100.0 liters (818 US gallons, 681 imperial gallons).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Abati 55 Portland holds one CE certification:

The boat is by European Union certified as Class A. OCEAN:

Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Abati 55 Portland is about 638 kg/cm, alternatively 3572 lbs/inch.
Meaning: if you load 638 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 3572 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Abati 55 Portland is 3.36.

Compared with other similar motor boats it is more spacy than 90% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Danish definition of a powerboat

According to this definition this boat is categorized as a Powerboat.

Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Abati 55 Portland it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.