Review of Allied Mistress

Basic specs.

sail specifications
The Allied Mistress is a sailboat.

Here we would have liked to show you nice photos of the Allied Mistress.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Allied Mistress or similar boat for sale


The boat can enter even shallow marinas as the draft is just about 1.37 - 1.47 meter (4.49 - 4.79 ft) dependent on the load. See immersion rate below.


The boat is typically equipped with an engine.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Allied Mistress is about 221 kg/cm, alternatively 1238 lbs/inch.
Meaning: if you load 221 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1238 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Allied Mistress is 3.25.

Slim Wide 54% 0 50 100
Compared with other similar sailboats it is more spacy than 54% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.

Over- / underrigged

Low High 98% 0 50 100
The Allied Mistress has more rig than 98% of all similar sailboats, which indicates that the boat is significantly overrigged.


Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 34m2 (365 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

Guiding dimensions of running rig
Mainsail halyard 31.0 m(101.8 feet)12 mm(1/2 inch)
Jib/genoa halyard31.0 m(101.8 feet)12 mm(1/2 inch)
Spinnaker halyard31.0 m(101.8 feet)12 mm(1/2 inch)
Jib sheet 11.9 m(39.0 feet)14 mm(0.55 inch)
Genoa sheet11.9 m(39.0 feet)14 mm(0.55 inch)
Mainsheet 29.7 m(97.5 feet)14 mm(0.55 inch)
Spinnaker sheet26.2 m(85.8 feet)14 mm(0.55 inch)
Cunningham4.3 m(14.2 feet)12 mm(1/2 inch)
Kickingstrap8.7 m(28.4 feet)12 mm(1/2 inch)
Clew-outhaul8.7 m(28.4 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.


We are always looking for new photos. If you can contribute with photos for Allied Mistress it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.