YachtDatabase.com

Review of Bi-Loup 77 NV


Basic specs.

sail specifications
The Bi-Loup 77 NV is a small sailboat designed by the New Zealander maritime architect Ron Holland in the mid nineties.

Here we would have liked to show you nice photos of the Bi-Loup 77 NV.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Bi-Loup 77 NV or similar boat for sale

Interior

The boat is equipped with 2 cabins, 4+2 berths and toilet facility.


Keel

Bilge keel

The Bi-Loup 77 NV is built with a bilge keel. A bilge keel is a twin keel, which allows the boat to be beached. Bilge keels are the most popular keel for tidal waters.

The boat can enter even shallow marinas as the draft is just about 1.35 - 1.45 meter (4.43 - 4.73 ft) dependent on the load. See immersion rate below.


Engine

Bi-Loup 77 NV may be equipped with an inboard Yanmar 2GM20 diesel engine

The transmission is a shaft drive. A shaft drive will in the long run require less maintenance than other types of drive e.g. a sail drive.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Bi-Loup 77 NV is about 125 kg/cm, alternatively 701 lbs/inch.
Meaning: if you load 125 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 701 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Bi-Loup 77 NV is 2.99.

Wide Slim 54% 0 50 100
Compared with other similar sailboats it is slimmer than 54% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 18m2 (193 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 7.5 m(24.5 feet)10 mm(3/8 inch)
Genoa sheet 7.5 m(24.5 feet)10 mm(3/8 inch)
Mainsheet 18.7 m(61.4 feet)10 mm(3/8 inch)
Spinnaker sheet16.5 m(54.0 feet)10 mm(3/8 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Bi-Loup 77 NV it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References