Review of Hanse 375e
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Hanse 375e or similar boat for sale
The boat is equipped with 2/3 cabins, 4-6 berths, a galley, 325 liters (85 US gallons, 71 imperial gallons) fresh water capacity and toilet facility.
The Hanse 375e has been built with different keel alternatives.
L-shape fin keel
One option is a L keel. An L-shape keel is a bulb keel with the shape as an L. This keel is less exposed to seaweed, fishing nets and lines.
The boat can enter most marinas as the draft is just about 1.60 - 1.70 meter (5.25 - 5.55 ft) dependent on the load. See immersion rate below.
Torpedo keel
Another option is a torpedo keel keel. But be aware that even though a Torpedo keel is very good for speed racing, a fishing nets and the like in the water can easily make you into a troublesome situation.
Hanse 375e can only enter major marinas as the draft is about 1.95 - 2.05 meter (6.40 - 6.70 ft) dependent on the load. See immersion rate below.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Hanse 375e is 2.00, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
Hanse 375e holds a CE certification:
The boat is by European Union certified as Class A. OCEAN:What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 7.7 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Hanse 375e is about 252 kg/cm, alternatively 1413 lbs/inch.
Meaning: if you load 252 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1413 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Hanse 375e is 23.8.
What is L/B (Length Beam Ratio)?
The l/b ratio for Hanse 375e is 3.00.
What is Displacement Length Ratio?
The DL-ratio for Hanse 375e is 187 which categorizes this boat among 'moderate racers'.
Maintenance
When buying anti-fouling bottom paint, it's nice to know how much to buy.
The surface of the wet bottom is about 40m2 (430 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.
Note: If you use a paint roller you will need more paint than if you use a paintbrush.
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
|---|---|---|---|---|
| Jib sheet | 11.2 m | (36.9 feet) | 14 mm | (0.55 inch) |
| Genoa sheet | 11.2 m | (36.9 feet) | 14 mm | (0.55 inch) |
| Mainsheet | 28.1 m | (92.3 feet) | 14 mm | (0.55 inch) |
| Spinnaker sheet | 24.8 m | (81.2 feet) | 14 mm | (0.55 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Hanse 375e it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.