YachtDatabase.com

Review of K 6


Basic specs.

sail specifications
The K 6 is a small sailboat designed by the Swedish maritime architect Carl Erik Ohlson together with Einar Ohlson also from Sweden in the mid forties. Less than 100 boats have been produced.

Here we would have liked to show you nice photos of the K 6.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a K 6 or similar boat for sale

Rig
The boat has more than one rig.

One option is a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Keel


Engine

An outboard motor is often used on this boat. In that case the boat will typically require a power of 3 - 4 hp, alternatively 69 - 83 lbs thrust if you prefer an electrical motor. Electric outboards are becoming popular for sailboat owners who want clean instant power with less noise and no exhaust fumes.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for K 6 is 1.95, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 5.8 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for K 6 is about 85 kg/cm, alternatively 476 lbs/inch.
Meaning: if you load 85 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 476 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for K 6 is 19.6.

Low High 93% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 93% of all similar sailboat designs. This is a comfort value significantly above average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for K 6 is 2.71.

Slim Wide 50% 0 50 100
Compared with other similar sailboats it is more spacy than 50% of all other designs. It seems that the designer has chosen an average hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for K 6 is 243 which categorizes this boat among 'light crusers & offshore racers'.

Heavy Light 24% 0 50 100
24% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for K 6 with ISO 8666 reference sail is 13.8, with a 135% genua the SA/D is 15.2.

Low High 14% 0 50 100
The SA/D ratio indicates that it is faster than 14% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for K 6 is 27

Slow Fast 27% 0 50 100
The relative speed performance is 27 which means that a it is faster than 27% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications genoa specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
Fractional rig
UsageLengthDiameter
Mainsail halyard 23.1 m(75.6 feet)6 mm(1/4 inch)
Jib/genoa halyard23.1 m(75.6 feet)6 mm(1/4 inch)
Spinnaker halyard23.1 m(75.6 feet)6 mm(1/4 inch)
Jib sheet 6.1 m(20.0 feet)8 mm(5/16 inch)
Genoa sheet6.1 m(20.0 feet)8 mm(5/16 inch)
Mainsheet 15.2 m(50.0 feet)8 mm(5/16 inch)
Spinnaker sheet13.4 m(44.0 feet)8 mm(5/16 inch)
Cunningham3.0 m(9.9 feet)6 mm(1/4 inch)
Kickingstrap6.1 m(19.9 feet)6 mm(1/4 inch)
Clew-outhaul6.1 m(19.9 feet)6 mm(1/4 inch)
Fractional rig
UsageLengthDiameter
Jib sheet 6.1 m(20.0 feet)8 mm(5/16 inch)
Genoa sheet6.1 m(20.0 feet)8 mm(5/16 inch)
Mainsheet 15.2 m(50.0 feet)8 mm(5/16 inch)
Spinnaker sheet13.4 m(44.0 feet)8 mm(5/16 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for K 6 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References