YachtDatabase.com

Review of Cometone 910 Plus


Basic specs.

sail specifications
The Cometone 910 Plus is a sailboat designed by the French maritime architect Jean-Marie Finot together with E. G. van de Stadt from Netherlands.

Here we would have liked to show you nice photos of the Cometone 910 Plus.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Cometone 910 Plus or similar boat for sale

Interior
The boat is equipped with 6 berths.

Keel

The boat can enter most marinas as the draft is just about 1.70 - 1.80 meter (5.58 - 5.88 ft) dependent on the load. See immersion rate below.


Engine

Cometone 910 Plus is typically equipped with a diesel engine at 10.0 hp (7 kW).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Cometone 910 Plus is 1.99, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Cometone 910 Plus is about 184 kg/cm, alternatively 1034 lbs/inch.
Meaning: if you load 184 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1034 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Cometone 910 Plus is 3.00.

Slim Wide 62% 0 50 100
Compared with other similar sailboats it is more spacy than 62% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 9.1 m(29.9 feet)12 mm(1/2 inch)
Genoa sheet 9.1 m(29.9 feet)12 mm(1/2 inch)
Mainsheet 22.8 m(74.6 feet)12 mm(1/2 inch)
Spinnaker sheet20.0 m(65.7 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Cometone 910 Plus it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References