Review of O'Day 19
The O'Day 19 is a small dinghy designed by the maritime architect bureau C. Raymond Hunt Associates
in the late seventies. Several hundred boats have been produced. The O'Day 19 is built by the American yard O'Day Corp.
Here we would have liked to show you nice photos of the O'Day 19.
If you have a photos you would like to share: Upload Image
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The keel is a centerboard. A centerboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.
The boat can sail close to the beach as the draft is just 0.30 - 0.40 meter (0.98 - 1.28 ft) dependent of the load. See immersion rate
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for O'Day 19 is about 80 kg/cm, alternative 449 lbs/inch.
Meaning: if you load 80 kg cargo on the boat then it will sink 1 cm.
Alternative, if you load 449 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category.
The basis of the following statistical computations is our unique database with more than 22,000 boat types and 350,000 data points.
L/B (Length Beam Ratio)
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
We always hunger for new photos. If you can contribute with photos for O'Day 19 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.