YachtDatabase.com

Review of Vindö 50


Vindö 50
Vindö 50.


Basic specs.

sail specifications
The Vindö 50 is a sailboat designed by the Swedish maritime architect Carl Andersson together with John H. V. Lindblom also from Sweden in the mid seventies.

Looking for a new boat? Find a Vindö 50 or similar boat for sale

Rig
The boat has more than one rig.

One option is a ketch rig.

Another option is a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Engine

The boat is typically equipped with an inboard Volvo Penta MD3 diesel engine at 36.0 hp (26 kW), which gives a max speed about 6.0 knots.

The fuel tank has a capacity of 60 liters (15 US gallons, 13 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Vindö 50 is 1.66, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.0 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Vindö 50 is about 175 kg/cm, alternatively 983 lbs/inch.
Meaning: if you load 175 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 983 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Vindö 50 is 34.9.

Low High 90% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 90% of all similar sailboat designs. This is a comfort value significantly above average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Vindö 50 is 3.41.

Wide Slim 73% 0 50 100
Compared with other similar sailboats it is slimmer than 73% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Vindö 50 is 319 which categorizes this boat among 'medium weight cruisers'.

Heavy Light 21% 0 50 100
21% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Vindö 50 with ISO 8666 reference sail is 12.4, with a 135% genua the SA/D is 14.5.

Low High 7% 0 50 100
The SA/D ratio indicates that it is faster than 7% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Vindö 50 is 4

Slow Fast 4% 0 50 100
The relative speed performance is 4 which means that a it is faster than 4% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for masthead rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
Masthead rig
UsageLengthDiameter
Mainsail halyard 29.4 m(96.5 feet)12 mm(1/2 inch)
Jib/genoa halyard29.4 m(96.5 feet)12 mm(1/2 inch)
Spinnaker halyard29.4 m(96.5 feet)12 mm(1/2 inch)
Jib sheet 10.7 m(34.9 feet)14 mm(0.55 inch)
Genoa sheet10.7 m(34.9 feet)14 mm(0.55 inch)
Mainsheet 26.6 m(87.4 feet)14 mm(0.55 inch)
Spinnaker sheet23.4 m(76.9 feet)14 mm(0.55 inch)
Cunningham3.9 m(12.8 feet)12 mm(1/2 inch)
Kickingstrap7.8 m(25.6 feet)12 mm(1/2 inch)
Clew-outhaul7.8 m(25.6 feet)12 mm(1/2 inch)
Ketch rig
UsageLengthDiameter
Jib sheet 10.7 m(34.9 feet)14 mm(0.55 inch)
Genoa sheet10.7 m(34.9 feet)14 mm(0.55 inch)
Mainsheet 26.6 m(87.4 feet)14 mm(0.55 inch)
Spinnaker sheet23.4 m(76.9 feet)14 mm(0.55 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Vindö 50 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References