Review of Polo 86
Basic specs.
Looking for a new boat? Find a Polo 86 or similar boat for sale
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Polo 86 is 1.96, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 6.5 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Polo 86 is about 139 kg/cm, alternatively 783 lbs/inch.
Meaning: if you load 139 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 783 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Polo 86 is 22.2.
What is L/B (Length Beam Ratio)?
The l/b ratio for Polo 86 is 2.96.
What is Displacement Length Ratio?
The DL-ratio for Polo 86 is 246 which categorizes this boat among 'light crusers & offshore racers'.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Polo 86 with ISO 8666 reference sail is 15.1, with a 135% genua the SA/D is 18.0.
What is Relative Speed Performance?
The Relative Speed Performance for Polo 86 is 62
Maintenance
Dimensions of sail for masthead rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 27.1 m | (88.7 feet) | 8 mm | (5/16 inch) |
| Jib/genoa halyard | 27.1 m | (88.7 feet) | 8 mm | (5/16 inch) |
| Spinnaker halyard | 27.1 m | (88.7 feet) | 8 mm | (5/16 inch) |
| Jib sheet | 8.6 m | (28.1 feet) | 10 mm | (3/8 inch) |
| Genoa sheet | 8.6 m | (28.1 feet) | 10 mm | (3/8 inch) |
| Mainsheet | 21.4 m | (70.3 feet) | 10 mm | (3/8 inch) |
| Spinnaker sheet | 18.9 m | (61.9 feet) | 10 mm | (3/8 inch) |
| Cunningham | 2.8 m | (9.2 feet) | 8 mm | (5/16 inch) |
| Kickingstrap | 5.6 m | (18.4 feet) | 8 mm | (5/16 inch) |
| Clew-outhaul | 5.6 m | (18.4 feet) | 8 mm | (5/16 inch) |
This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Polo 86 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.