Review of Sun Odyssey 44i

Basic specs.

The Sun Odyssey 44i is a large sailboat designed by the French maritime architect Philippe Briand.

Here we would have liked to show you nice photos of the Sun Odyssey 44i.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Sun Odyssey 44i or similar boat for sale

Interior

The boat is equipped with 6+2 berths.

Rig

The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Keel

The Sun Odyssey 44i is equipped with a fin keel. The fin keel is the most common keel and provides splendid manoeuvrability. The downside is that it has less directional stability than a long keel.

The boat can only enter major marinas as the draft is about 2.05 - 2.15 meter (6.73 - 7.03 ft) dependent on the load. See immersion rate below.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Sun Odyssey 44i is 2.05, indicating that this boat would not be accepted to participate in ocean races.

EU classification

Sun Odyssey 44i holds one CE certification:

The boat is by European Union certified as Class A. OCEAN:

Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 8.9 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Sun Odyssey 44i is about 392 kg/cm, alternatively 2198 lbs/inch.
Meaning: if you load 392 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2198 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Sun Odyssey 44i is 21.8.

Comparing this ratio with similar sailboats show that it is more comfortable than 12% of all similar sailboat designs. This is a comfort value significantly below average.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Sun Odyssey 44i is 3.15.

Compared with other similar sailboats it is more spacy than 76% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.

Ballast Ratio

What is a Ballast Ratio?

The ballast ratio for Sun Odyssey 44i is 29%.

This ballast ratio shows a righting moment that is higher than 15% of all similar sailboat designs. A righting moment (ability to resist heeling) significantly below average.

D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Sun Odyssey 44i is 114 which categorizes this boat among 'ultra light racers'.

90% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.

SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Sun Odyssey 44i with ISO 8666 reference sail is 17.4, with a 135% genua the SA/D is 20.3.

The SA/D ratio indicates that it is faster than 34% of all similar sailboat designs in light wind.

Over- / underrigged

The Sun Odyssey 44i has more rig than 82% of all similar sailboats, which indicates that the boat is significantly overrigged.

Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 65m² (699 ft²).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.

Rig

Dimensions of sail for fractional rig.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Mainsail halyard	39.5 m	(129.5 feet)	14 mm	(0.55 inch)
Jib/genoa halyard	39.5 m	(129.5 feet)	14 mm	(0.55 inch)
Spinnaker halyard	39.5 m	(129.5 feet)	14 mm	(0.55 inch)
Jib sheet	13.8 m	(45.1 feet)	16 mm	(5/8 inch)
Genoa sheet	13.8 m	(45.1 feet)	16 mm	(5/8 inch)
Mainsheet	34.4 m	(112.8 feet)	16 mm	(5/8 inch)
Spinnaker sheet	30.3 m	(99.2 feet)	16 mm	(5/8 inch)
Cunningham	5.3 m	(17.4 feet)	14 mm	(0.55 inch)
Kickingstrap	10.6 m	(34.8 feet)	14 mm	(0.55 inch)
Clew-outhaul	10.6 m	(34.8 feet)	14 mm	(0.55 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Sun Odyssey 44i it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.