Review of Swift Trawler 34

Basic specs.

The Swift Trawler 34 is a motorboat designed by the French maritime architect Michel Joubert together with Bernard Nivelt also from France.

Here we would have liked to show you nice photos of the Swift Trawler 34.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Swift Trawler 34 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Engine

The boat is typically equipped with an inboard Volvo Penta engine.

The transmission is a shaft drive.

The fuel tank has a capacity of 800 liters (211 US gallons, 175 imperial gallons).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Swift Trawler 34 holds three CE certifications:

If less than 8 in on board the boat is by European Union certified as Class B. OFFSHORE:

Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.

If less than 10 in on board the boat is by European Union certified as Class C. INSHORE:

Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 (Beaufort scale) and significant wave heights up to, and including, 2 m may be experienced.

If less than 11 in on board the boat is by European Union certified as Class D. SHELTERED WATERS:

Designed for voyages on sheltered coastal waters, small bays, small lakes, rivers and canals when conditions up to, and including, wind force 4 (Beaufort scale) and significant wave heights up to, and including, 0,3 m may be experienced, with occasional waves of 0,5 m maximum height, for example from passing vessels.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Swift Trawler 34 is about 292 kg/cm, alternatively 1639 lbs/inch.
Meaning: if you load 292 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1639 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Swift Trawler 34 is 2.51.

Compared with other similar motor boats it is more spacy than 98% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Danish definition of a powerboat

According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 102 kW (137 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'

Maintenance

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Swift Trawler 34 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.