YachtDatabase.com

Review of Tatoosh 42


Basic specs.

sail specifications
The Tatoosh 42 is a large sailboat designed by the American maritime architect Robert H. Perry in the mid eighties. The Tatoosh 42 is built by the Taiwanese yard Ta Shing Yacht Building Ltd..

Here we would have liked to show you nice photos of the Tatoosh 42.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Tatoosh 42 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Rig
The boat equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.

Engine

The boat is typically equipped with a Westerbeke W46 diesel engine at 46.0 hp (34 kW), which gives a max speed about 6.6 knots.

The fuel tank has a capacity of 265 liters (70 US gallons, 58 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Tatoosh 42 is 1.84, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 8.1 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Tatoosh 42 is about 289 kg/cm, alternatively 1620 lbs/inch.
Meaning: if you load 289 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1620 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Tatoosh 42 is 28.9.

Low High 42% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 42% of all similar sailboat designs. This comfort value is just below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Tatoosh 42 is 3.28.

Slim Wide 54% 0 50 100
Compared with other similar sailboats it is more spacy than 54% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Tatoosh 42 is 196 which categorizes this boat among 'light racers'.

Heavy Light 73% 0 50 100
73% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Tatoosh 42 with ISO 8666 reference sail is 16.7, with a 135% genua the SA/D is 19.7.

Low High 34% 0 50 100
The SA/D ratio indicates that it is faster than 34% of all similar sailboat designs in light wind.


Maintenance

Rig

Dimensions of sail for masthead rig.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 35.6 m(116.8 feet)12 mm(1/2 inch)
Jib/genoa halyard35.6 m(116.8 feet)12 mm(1/2 inch)
Spinnaker halyard35.6 m(116.8 feet)12 mm(1/2 inch)
Jib sheet 12.8 m(41.8 feet)14 mm(0.55 inch)
Genoa sheet12.8 m(41.8 feet)14 mm(0.55 inch)
Mainsheet 31.9 m(104.6 feet)14 mm(0.55 inch)
Spinnaker sheet28.1 m(92.0 feet)14 mm(0.55 inch)
Cunningham5.2 m(17.0 feet)12 mm(1/2 inch)
Kickingstrap10.4 m(34.0 feet)12 mm(1/2 inch)
Clew-outhaul10.4 m(34.0 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Tatoosh 42 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References