YachtDatabase.com

Review of Roue 20


Basic specs.

sail specifications
The Roue 20 is a sailboat designed by the maritime architect William J. Roué in the early twenties.

Here we would have liked to show you nice photos of the Roue 20.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Roue 20 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Rig
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Roue 20 is 1.91, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.1 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Roue 20 is about 104 kg/cm, alternatively 585 lbs/inch.
Meaning: if you load 104 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 585 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Roue 20 is 18.8.

Low High 21% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 21% of all similar sailboat designs. This is a comfort value significantly below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Roue 20 is 3.87.

Wide Slim 97% 0 50 100
Compared with other similar sailboats it is slimmer than 97% of all other designs. It seems that the designer has chosen a significantly more speedy hull design. This type of design is also referred to as 'needle'.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Roue 20 is 226 which categorizes this boat among 'light crusers & offshore racers'.

Heavy Light 62% 0 50 100
62% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Roue 20 with ISO 8666 reference sail is 21.8, with a 135% genua the SA/D is 24.2.

Low High 97% 0 50 100
The SA/D ratio indicates that it is faster than 97% of all similar sailboat designs in light wind.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 28.2 m(92.5 feet)10 mm(3/8 inch)
Jib/genoa halyard28.2 m(92.5 feet)10 mm(3/8 inch)
Spinnaker halyard28.2 m(92.5 feet)10 mm(3/8 inch)
Jib sheet 9.4 m(31.0 feet)12 mm(1/2 inch)
Genoa sheet9.4 m(31.0 feet)12 mm(1/2 inch)
Mainsheet 23.6 m(77.5 feet)12 mm(1/2 inch)
Spinnaker sheet20.8 m(68.2 feet)12 mm(1/2 inch)
Cunningham4.5 m(14.8 feet)10 mm(3/8 inch)
Kickingstrap9.0 m(29.6 feet)10 mm(3/8 inch)
Clew-outhaul9.0 m(29.6 feet)10 mm(3/8 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Roue 20 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References