YachtDatabase.com

Review of Knarr




Basic specs.

sail specifications
The Knarr is a sailboat designed by the maritime architect Erling Kristoffersen together with H. Aall in the early forties. Several hundred boats have been produced. The Knarr is built by the Danish yard Børresens Bådebyggeri A/S.

Here we would have liked to show you nice photos of the Knarr.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Knarr or similar boat for sale

Hull
The hull is made of wood.

Interior
The interior is like most other boats made of teak. Teak has the advantage of being naturally very oily and therefore water-repellent, which is suitable on boats.
The boat is equipped with 4 berths.
Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.

Rig
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Knarr is 1.61, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.0 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Knarr is about 88 kg/cm, alternatively 493 lbs/inch.
Meaning: if you load 88 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 493 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Knarr is 25.7.

Low High 62% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 62% of all similar sailboat designs. This comfort value is just above average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Knarr is 4.38.

Wide Slim 100% 0 50 100
Compared with other similar sailboats it is slimmer than 100% of all other designs. It seems that the designer has chosen a significantly more speedy hull design. This type of design is also referred to as 'needle'.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Knarr is 273 which categorizes this boat among 'light crusers & offshore racers'.

Heavy Light 42% 0 50 100
42% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Knarr with ISO 8666 reference sail is 13.1, with a 135% genua the SA/D is 14.4.

Low High 15% 0 50 100
The SA/D ratio indicates that it is faster than 15% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Knarr is 12

Slow Fast 12% 0 50 100
The relative speed performance is 12 which means that a it is faster than 12% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications genoa specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 24.9 m(81.8 feet)10 mm(3/8 inch)
Jib/genoa halyard24.9 m(81.8 feet)10 mm(3/8 inch)
Spinnaker halyard24.9 m(81.8 feet)10 mm(3/8 inch)
Jib sheet 9.3 m(30.4 feet)12 mm(1/2 inch)
Genoa sheet9.3 m(30.4 feet)12 mm(1/2 inch)
Mainsheet 23.2 m(76.1 feet)12 mm(1/2 inch)
Spinnaker sheet20.4 m(67.0 feet)12 mm(1/2 inch)
Cunningham3.4 m(11.2 feet)10 mm(3/8 inch)
Kickingstrap6.8 m(22.3 feet)10 mm(3/8 inch)
Clew-outhaul6.8 m(22.3 feet)10 mm(3/8 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Knarr it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References