YachtDatabase.com

Review of Passad


Passad
Passad anno 1978.

Basic specs.

sail specifications
The Passad is a large sailboat designed by the Swedish maritime architect Erik Liedstrand.

Looking for a new boat? Find a Passad or similar boat for sale

Rig
Rig
Rig of Passad anno 1978. Originalritning Passad
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Passad is 1.67, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.4 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Passad is about 155 kg/cm, alternatively 869 lbs/inch.
Meaning: if you load 155 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 869 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Passad is 21.4.

Low High 14% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 14% of all similar sailboat designs. This is a comfort value significantly below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Passad is 4.88.

Wide Slim 100% 0 50 100
Compared with other similar sailboats it is slimmer than 100% of all other designs. It seems that the designer has chosen a significantly more speedy hull design. This type of design is also referred to as 'needle'.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Passad is 125 which categorizes this boat among 'ultra light racers'.

Heavy Light 92% 0 50 100
92% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Passad with ISO 8666 reference sail is 16.7, with a 135% genua the SA/D is 19.2.

Low High 42% 0 50 100
The SA/D ratio indicates that it is faster than 42% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Passad is 15

Slow Fast 15% 0 50 100
The relative speed performance is 15 which means that a it is faster than 15% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 28.8 m(94.5 feet)12 mm(1/2 inch)
Jib/genoa halyard28.8 m(94.5 feet)12 mm(1/2 inch)
Spinnaker halyard28.8 m(94.5 feet)12 mm(1/2 inch)
Jib sheet 12.3 m(40.4 feet)14 mm(0.55 inch)
Genoa sheet12.3 m(40.4 feet)14 mm(0.55 inch)
Mainsheet 30.8 m(100.9 feet)14 mm(0.55 inch)
Spinnaker sheet27.1 m(88.8 feet)14 mm(0.55 inch)
Cunningham3.9 m(12.8 feet)12 mm(1/2 inch)
Kickingstrap7.8 m(25.6 feet)12 mm(1/2 inch)
Clew-outhaul7.8 m(25.6 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Passad it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References