YachtDatabase.com

Review of Platu 25


Basic specs.

sail specifications
The Platu 25 aka Beneteau 25 (One-Design) is a small sailboat designed by the maritime architect Bruce Farr in the mid nineties. The Platu 25 is built by the New Zealander yard McDell Marine.

Here we would have liked to show you nice photos of the Platu 25.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Platu 25 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Rig
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Platu 25 is 2.42, indicating that this boat would not be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Platu 25 is about 117 kg/cm, alternatively 656 lbs/inch.
Meaning: if you load 117 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 656 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Platu 25 is 10.7.

Low High 12% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 12% of all similar sailboat designs. This is a comfort value significantly below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Platu 25 is 2.89.

Slim Wide 58% 0 50 100
Compared with other similar sailboats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Platu 25 is 112 which categorizes this boat among 'ultra light racers'.

Heavy Light 90% 0 50 100
90% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Platu 25 with ISO 8666 reference sail is 25.4, with a 135% genua the SA/D is 29.0.

Low High 99% 0 50 100
The SA/D ratio indicates that it is faster than 99% of all similar sailboat designs in light wind.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 24.8 m(81.4 feet)8 mm(5/16 inch)
Jib/genoa halyard24.8 m(81.4 feet)8 mm(5/16 inch)
Spinnaker halyard24.8 m(81.4 feet)8 mm(5/16 inch)
Jib sheet 7.5 m(24.6 feet)10 mm(3/8 inch)
Genoa sheet7.5 m(24.6 feet)10 mm(3/8 inch)
Mainsheet 18.7 m(61.4 feet)10 mm(3/8 inch)
Spinnaker sheet16.5 m(54.1 feet)10 mm(3/8 inch)
Cunningham3.6 m(12.0 feet)8 mm(5/16 inch)
Kickingstrap7.3 m(24.0 feet)8 mm(5/16 inch)
Clew-outhaul7.3 m(24.0 feet)8 mm(5/16 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Platu 25 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References