YachtDatabase.com

Review of Selection 37


Basic specs.

sail specifications
The Selection 37 is a sailboat designed by the French maritime architect Michel Joubert together with Bernard Nivelt also from France. The Selection 37 is built by the French yard Jeanneau.

Here we would have liked to show you nice photos of the Selection 37.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Selection 37 or similar boat for sale

Hull
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior
The boat is equipped with 3 cabins, 8 berths, a galley and toilet facility.

Rig
The boat equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a genaker or a spinnaker for optimal speed.

Engine

The boat is typically equipped with an inboard diesel engine at 18.0 hp (13 kW), which gives a max speed about 5.6 knots.

The transmission is a shaft drive. A shaft drive will in the long run require less maintenence than other types of drive e.g. a sail drive.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Selection 37 is 2.04, indicating that this boat would not be accepted to participate in ocean races.


Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Selection 37 is about 196 kg/cm, alternatively 1098 lbs/inch.
Meaning: if you load 196 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1098 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

Motion Comfort Ratio

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Selection 37 is 19.3.

Low High 14% 0 50 100
Comparing this ratio with similar sailboats show that it is more comfortable than 14% of all similar sailboat designs. This is a comfort value significantly below average.


L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Selection 37 is 3.33.

Wide Slim 66% 0 50 100
Compared with other similar sailboats it is slimmer than 66% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Selection 37 is 163 which categorizes this boat among 'light racers'.

Heavy Light 86% 0 50 100
86% of all similar sailboat designs are categorized as heavier. A light displacement requires less sailarea and has higher accellerations.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Selection 37 with ISO 8666 reference sail is 21.5, with a 135% genua the SA/D is 24.5.

Low High 95% 0 50 100
The SA/D ratio indicates that it is faster than 95% of all similar sailboat designs in light wind.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Selection 37 is 96

Slow Fast 96% 0 50 100
The relative speed performance is 96 which means that a it is faster than 96% of all similar sailboat designs.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications headsail specifications genoa specifications spinnaker specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 34.4 m(112.9 feet)12 mm(1/2 inch)
Jib/genoa halyard34.4 m(112.9 feet)12 mm(1/2 inch)
Spinnaker halyard34.4 m(112.9 feet)12 mm(1/2 inch)
Jib sheet 10.9 m(35.8 feet)14 mm(0.55 inch)
Genoa sheet10.9 m(35.8 feet)14 mm(0.55 inch)
Mainsheet 27.2 m(89.4 feet)14 mm(0.55 inch)
Spinnaker sheet24.0 m(78.7 feet)14 mm(0.55 inch)
Cunningham5.0 m(16.4 feet)12 mm(1/2 inch)
Kickingstrap10.0 m(32.8 feet)12 mm(1/2 inch)
Clew-outhaul10.0 m(32.8 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's changes, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Selection 37 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References